Description
STRAIGHT SECTION
Standard Dimensions
Length (L): 2500mm, 3000mm.
Width (W): 100mm, 200mm,…900mm.
Height (H): 50mm, 70mm, 100mm, 120mm, 150mm.
Depth (D): 1.2mm, 1.5mm, 2.0mm.
Rung spacing: 300mm.
Material: Mild steel sheet / PO steel sheet.
Constructed Type: MIG welding.
Finish: Epoxy powder coating / Hot dip galvanized / Bare galvanized.
HORIZONTAL TEE
Standard Dimensions
Length (L):
Width (W): 100mm, 200mm,…900mm.
Height (H): 50mm, 70mm, 100mm, 120mm, 150mm.
Depth (D): 1.2mm, 1.5mm, 2.0mm.
Material: Mild steel sheet / PO steel sheet.
Constructed Type: MIG welding.
Finish: Epoxy powder coating / Hot dip galvanized / Bare galvanized.
HORIZONTAL TEE
Standard Dimensions
Length (L):
Width (W): 100mm, 200mm,…900mm.
Height (H): 50mm, 70mm, 100mm, 120mm, 150mm.
Depth (D): 1.2mm, 1.5mm, 2.0mm.
Material: Mild steel sheet / PO steel sheet.
Constructed Type: MIG welding.
Finish: Epoxy powder coating / Hot dip galvanized / Bare galvanized.
HORIZONTAL ELBOW
Standard Dimensions
Length (L):
Width (W): 100mm, 200mm,…900mm.
Height (H): 50mm, 70mm, 100mm, 120mm, 150mm.
Depth (D): 1.2mm, 1.5mm, 2.0mm.
Material: Mild steel sheet / PO steel sheet.
Constructed Type: MIG welding.
Finish: Epoxy powder coating / Hot dip galvanized / Bare galvanized.
VERTICAL TEE
Standard Dimensions
Length (L):
Width (W): 100mm, 200mm,…900mm.
Height (H): 50mm, 70mm, 100mm, 120mm, 150mm.
Depth (D): 1.2mm, 1.5mm, 2.0mm.
Material: Mild steel sheet / PO steel sheet.
Constructed Type: MIG welding.
Finish: Epoxy powder coating / Hot dip galvanized / Bare galvanized.
REDUCER OFFSET
Standard Dimensions
Length (L):
Width (W): 100mm, 200mm,…900mm.
Height (H): 50mm, 70mm, 100mm, 120mm, 150mm.
Depth (D): 1.2mm, 1.5mm, 2.0mm.
Material: Mild steel sheet / PO steel sheet.
Constructed Type: MIG welding.
Finish: Epoxy powder coating / Hot dip galvanized / Bare galvanized.
RIGHT HAND REDUCER
Standard Dimensions
Length (L):
Width (W): 100mm, 200mm,…900mm.
Height (H): 50mm, 70mm, 100mm, 120mm, 150mm.
Depth (D): 1.2mm, 1.5mm, 2.0mm.
Material: Mild steel sheet / PO steel sheet.
Constructed Type: MIG welding.
Finish: Epoxy powder coating / Hot dip galvanized / Bare galvanized.
LEFT HAND REDUCER
Standard Dimensions
Length (L):
Width (W): 100mm, 200mm,…900mm.
Height (H): 50mm, 70mm, 100mm, 120mm, 150mm.
Depth (D): 1.2mm, 1.5mm, 2.0mm.
Material: Mild steel sheet / PO steel sheet.
Constructed Type: MIG welding.
Finish: Epoxy powder coating / Hot dip galvanized / Bare galvanized.
INSIDE VERTICAL RISER
Standard Dimensions
Length (L):
Width (W): 100mm, 200mm,…900mm.
Height (H): 50mm, 70mm, 100mm, 120mm, 150mm.
Depth (D): 1.2mm, 1.5mm, 2.0mm.
Material: Mild steel sheet / PO steel sheet.
Constructed Type: MIG welding.
Finish: Epoxy powder coating / Hot dip galvanized / Bare galvanized.
OUT VERTICAL RISER
Standard Dimensions
Length (L):
Width (W): 100mm, 200mm,…900mm.
Height (H): 50mm, 70mm, 100mm, 120mm, 150mm.
Depth (D): 1.2mm, 1.5mm, 2.0mm.
Material: Mild steel sheet / PO steel sheet.
Constructed Type: MIG welding.
Finish: Epoxy powder coating / Hot dip galvanized / Bare galvanized.
